Skip to main content
Configuring Profile Switches
Support avatar
Written by Support
Updated over 11 months ago

To allow you to quickly and easily switch between Stream Deck Profiles, a majority of our products now include a dedicated 'Profile Switcher' key. This key can be configured to load another aircraft, the Flight Panels Profile Switcher, an AeroLens Pro Profile or any other Stream Deck profile of your choice.

Button Configuration

  1. Launch the Stream Deck software and open the profile you wish to amend

  2. Locate the Profile Switcher button and click on it to open the inspector window

  3. Select your Stream Deck from the Device drop down (typically Current)

  4. Select the profile that you want to load from the Profile drop down

Example
Device: Stream Deck XL (Current)
Profile: Flight Panels - FlyByWire - Airbus A32NX - Series

In the above example, pressing the dedicated profile switcher button would load the FlyByWire Airbus A32NX Series profile on the current device. If you have multiple devices, simply select the appropriate device from the drop down.

Flight Panels Profile Switcher

The Flight Panels Profile Switcher is designed to make switching between aircraft profiles incredibly easy and efficient. With just one click, you can rapidly switch between separate profile settings, enabling a smooth and seamless transition.

Configuring the Profile Switcher

  1. Launch the Stream Deck software and load the Flight Panels Profile Switcher

  2. Select the button that you wish to configure, for example 'A32NX' (FlyByWire)

  3. Click on one of the Profile Switcher buttons to open the key inspector window

  4. Select your Stream Deck from the Device drop down (typically Current)

  5. Select the profile that you want to load from the Profile drop down

Example
Button: A32NX

Device: Stream Deck XL (Current)
Profile: Flight Panels - FlyByWire - Airbus A32NX - Series

In the above example, pressing the A32NX button will load the Flight Panels Airbus A32NX Series Profile. Repeat this process for each additional key where required. To configure a button, you must own the respective profiles.

Did this answer your question?